Discussion on “Enhancement of combined heat and power economic dispatch using self adaptive real-coded genetic algorithm,by P. Subbaraj et al., Applied Energy 86 (2009) 915–921.”

The paper studied by Subbaraj et al. (2009) considers the feasibility of using self adaptive real-coded genetic algorithm for enhancement of combined heat and power economic dispatch. The paper includes some problems about the considered feasible operating region. In this discussion, the controversial point of the paper are given.     

A hybrid root transformation and decision on belief approach to monitor multiattribute Poisson processes

Most of industrial applications of statistical process control involve more than one quality characteristics to be monitored. These characteristics are usually correlated, causing challenges for the monitoring methods. These challenges are resolved using multivariate quality control charts that have been widely developed in recent years. Nonetheless, multivariate process monitoring methods encounter a problem when the quality characteristics are of the attribute type and follow nonnormal distributions such as multivariate binomial or multivariate Poisson. Since the data analysis in the latter case is not as easy as the normal case, more complexities are involved to monitor multiattribute processes. In this paper, a hybrid procedure is developed to monitor multiattribute correlated processes, in which number of defects in each characteristic is important. Two phases are proposed to design the monitoring scheme. In the first phase, the inherent skewness of multiattribute Poisson data is almost removed using a root transformation technique. In the second phase, a method based on the decision on belief concept is employed. The transformed data obtained from the first phase are implemented on the decision on belief (DOB) method. Finally, some simulation experiments are performed to compare the performances of the proposed methodology with the ones obtained using the Hotelling T ² and the MEWMA charts in terms of in-control and out-of-control average run length criteria. The simulation results show that the proposed methodology outperforms the other two methods.     

Practical Implementation of Novel Robust Position Control Scheme for Synchronous Reluctance Motor

A variable structure robust position controller is presented for a three-phase synchronous reluctance motor. Linear control and variable structure control and pulse-width modulation generation are combined. These provide robust, fast, and accurate position control without the penalty of high chattering. Schemes, including conventional sliding-mode control and the proposed scheme, are tested under parameter variations, and sudden perturbations are applied to the system at a specific time, then compared. This scheme uses both advantages of traditional variable structure control methods and linear methods. The disadvantages of each method, such as chattering and parameter sensitivity, are minimized. Results demonstrate that the proposed technique preserves the classical linear position control merits, while both the steady-state and transient behavior are significantly improved in terms of robustness, accuracy, and low ripple. The results also prove that the position reference command is perfectly tracked in spite of motor parameter uncertainties and load torque disturbance in control of the system that uses the new schemes.     

Thermally exfoliated graphene oxide reinforced fluorinated pentablock poly(l‐lactide‐co‐ε‐caprolactone) electrospun scaffolds: Insight into antimicrobial activity and biodegradation

Three‐dimensional fluorinated pentablock poly(l ‐lactide‐co‐ε‐caprolactone)‐based scaffolds were successfully produced by the incorporation of thermally exfoliated graphene oxide (TEGO) as an antimicrobial agent with an electrospinning technique. In a ring‐opening polymerization, the fluorinated groups in the middle of polymer backbone were attached with a perfluorinated reactive stabilizer having oxygen‐carrying ability. The fiber diameter and its morphologies were optimized through changes in TEGO amount, voltage, polymer concentration, and solvent type to obtain an ideal scaffold structure. Instead of the widely used graphene oxide synthesized by Hummer's method, TEGO sheets having a low amount of oxygen produced by thermal expansion were integrated into the fiber structure to investigate the effect of the oxygen functional groups of TEGO sheets on the degradation and antimicrobial activity of the scaffolds. There was no antimicrobial activity in TEGO‐reinforced scaffolds in the in vitro tests in contrast to the literature. This study confirmed that a low number of oxygen functional groups on the surface of TEGO restricted the antimicrobial activity of the fabricated composite scaffolds. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43490.     

Effect of different size of joint enlargement on seismic behavior of gravity load designed RC beam‐column connections

Effect of different size of planer joint enlargement as a noninvasive and practical strategy for seismic retrofit of gravity load designed external reinforced concrete beam‐column connections was experimentally investigated. The joint region was enlarged using steel angles that are mounted using prestressed cross‐ties. Reverse cyclic load tests on five half‐scale control and retrofitted external RC beam‐column connections were conducted. Three different size of planer joint enlargement being 180, 140, and 90 mm were considered for retrofitted specimens. The performance of the retrofitted specimens is compared with that of the control gravity load designed beam‐column connections, in terms of load–displacement hysteresis curve, energy dissipation and ductility capacities, and global strength and stiffness degradation behavior. The experimental results showed that increasing the size of planer joint enlargement significantly enhances the seismic capacity of the retrofitted connections, in terms of strength, stiffness, energy dissipation, and ductility capacity and also planer joint enlargement can relocate beam plastic hinges to outside the joint panel.     

Use of a selective extractant-impregnated resin for removal of Pb(II) ion from waters and wastewaters: Kinetics,equilibrium and thermodynamic study

Adsorption of Pb(II) ion by a novel extractant-impregnated resin, EIR, was studied as a function of various experimental parameters using batch adsorption experiments. The new EIR was prepared by impregnating gallocyanine (GCN) onto Amberlite XAD-16 resin beads. The EIR was characterized by nitrogen analysis and SEM micrographs. The new EIR showed excellent selectivity factor values (α) for Pb(II) adsorption respect to other metal ions. The effects of some chemical and physical variables were evaluated and the optimum conditions were found for Pb(II) removal from aqueous solutions. The equilibrium adsorption isotherm was fitted with the Langmuir adsorption model. The maximum adsorption capacity (q_max) of EIR for Pb(II) ions was found to be 367.92 mg g⁻¹. The kinetic studies showed that the intra-particle diffusion is the rate-controlling step. Also, the intra-particle diffusion coefficients, D_ip values, were of the order of 10⁻¹² m² s⁻¹. The values of enthalpy (ΔH°) were positive, which confirms the endothermic nature of adsorption process. Also, the positive entropy changes (ΔS°) were showed that the randomness increased along with the adsorption process. In addition, the obtained negative values of Gibbs free energy (ΔG°) indicated feasible and spontaneous nature of the adsorption process at different temperatures. The new adsorbent was very stable so that it can be successfully used for many consecutive cycles without significant loss in its adsorption capacity.     

Microstructural and mechanical assessment of transient liquid phase bonded commercially pure titanium

Diffusion joining of commercially pure titanium was successfully prepared via transient liquid phase bonding in vacuum environment. The process was carried out using AMS 4772 silver-based filler alloy at 900–1000°C for various holding time under the vacuum of 6?×?10^?7?Torr. Optical and scanning electron microscopy equipped with an EDS analyzer was conducted for microstructural evaluations. Mechanical properties were also investigated by shear test, fractographic assessment and X-ray diffraction analyses. The tendency to achieve isothermally solidified joint increased by increasing bonding time. No sign of athermal solidification was detected of sample bonded at 1000°C for 90?min. Consequently, the bonding condition of a high quality joint was obtained. Elemental analyses revealed that filler alloy’s elements (Ag, Cu) distributed more uniformly in fully isothermal solidified bond, whereas the aggregation of these elements is considerable in athermally solidified bond. Shear test results represented that the highest shear strength attributed to the sample bonded in isothermal solidified condition (bonded at 1000°C for 90?min).     

Comparison of optical properties between ladder and lambda-type EIT medium with Er3+ ion concentration in Er3+:YAG crystal

The effect of Er³⁺ doped ion concentration on optical properties of two type three-level schemes in 35 nm Er³⁺:YAG (yttrium aluminum garnet) crystal is studied. It is found that intensity threshold of optical bistability and multistability can be changed by Er³⁺ doped ion concentration. Moreover, switching from optical multistability to optical bistability can be done differently by Er³⁺ concentration in two types of three-level schemes. The steady-state and transient behaviors of absorption, dispersion and group index of weak probe field in two schemes are also discussed. In this study, we will report an initial study on optical properties in Er³⁺:YAG crystal and propose a basis for selecting the suitable concentration to carry out experimental investigations in the future.